| Part name: | 1600 short block used AB block based |
| Part number: | 1600sb |
| Your cost: | $925.00 |
| Description: | Sold, but if you send us yours maybe we can duplicate this for you. This starts with a used block (maybe a modern A block, like we used for this engine) that you would send us to build on. Here's how this engine was built, yours may be done differently: It has been align bored to 60 over and still has a standard thrust. 10mm head studs & case savers. A New standard/standard 4 dowel crank is inside. On that we hung Rimco rebuilt, resized, rebushed, end to end and mate balanced stock rods. At the back we put a perfect used, stock 12 Volt flywheel, a new silicone fly seal with a Brazilian gland nut & stock washer. A like new, stock camshaft* with helical gear turns in single thrust bearings. Like new oem lifters, mated to the above cam are inside. A like new, 26mm geared Schadek oil pump is installed with a new pump face. A perfect used, drain plug style drain plate is there with a new oil screen and a plain drain plug. A new distributor drive pinion gear is installed with new washers and distributor tension spring. Stock nuts are on the mains, surrounds & oil pump. Perfect used steel cam drive gear and distributor drive gear is on the crank with used spring clip & oil slinger. *the next cam will be new and can be any reasonable other cam you want. Allow 1-2 weeks to build E-mail for shipping cost to you |