|
|
| Part name: | 1835cc short block |
| Part number: | dh1776 |
| Your cost: | $1,000.00 |
| Description: | We can build one of these for you but it will be based on a new block, unless you send us your block to build on. On the block shown here we used double thrust Mahle cam bearings to hold the Engle 120 cam (435L x 294D) which turns by a straight cut gear. Oem reground & weight mated (84/85 grams each) lifters ride just above a windage tray. A std std 69 stroke crank has been polished & balanced & bolts up to a 4 dowel new stock flywheel that has been balanced. A German gland nut & an Empi large washer holds them together. A Performance Products bypass filtered oil pump (modified by us for better flow & camshaft engagement) will push the oil around thru a filter, not supplied. Long drain plate studs are in anticipation of adding a deep sump. A magnetic drain plug sits on a chrome drain plate, beneath a new oil screen. Oem rods (have been resized, end to end & mate balanced, new bushings & nuts added) ride on Mahle std bearings. Silicone flywheel seal, grooved metal cam plug. Allow 1-2 weeks to build. E-mail for shipping cost to you |