Part name:
2052cc short block - new block based
Part number:
2052sb
Your cost:
$1,948.00
E-mail us your ship-to address to get a shipping quote.
Description:
This short block starts with a Scat prepared oem vw block that has 8mm case savers and has been opened for 94mm jugs. It may be built next time with an aluminum block.
We ad new bearings of course and an Empi 4140 chromoly counterweighted 8 doweled crank.
On the crank we hang Scat 5.5" I beam rods on German rod bearings.
New gears drive the distributor (not included) and straight cut billet steel gears drive the Scat c-45 cam (429"L x 298D w/ 1.1 rockers or 488"L w/ 1.25.1 rockers).
Scat drilled lobe lifters keep the cam wet just above the Empi windage tray.
A grooved oil plunger is at the pulley end while a stock rides in the rear by the flywheel. Both on new stock springs and hex head hardware by Scat.
A new oil screen and chrome drain plate & magnetic drain plug by Empi close up the bottom.
An Empi hi volume cast iron oil pump moves the fluids.
Holding on the Scat chromoly lightened flywheel is a Scat chromoly gland nut kit.
New cranks keys, wavy washers & nylock nuts throughout.
Allow 1-2 weeks to build.
E-mail us for shipping cost to you.
We ad new bearings of course and an Empi 4140 chromoly counterweighted 8 doweled crank.
On the crank we hang Scat 5.5" I beam rods on German rod bearings.
New gears drive the distributor (not included) and straight cut billet steel gears drive the Scat c-45 cam (429"L x 298D w/ 1.1 rockers or 488"L w/ 1.25.1 rockers).
Scat drilled lobe lifters keep the cam wet just above the Empi windage tray.
A grooved oil plunger is at the pulley end while a stock rides in the rear by the flywheel. Both on new stock springs and hex head hardware by Scat.
A new oil screen and chrome drain plate & magnetic drain plug by Empi close up the bottom.
An Empi hi volume cast iron oil pump moves the fluids.
Holding on the Scat chromoly lightened flywheel is a Scat chromoly gland nut kit.
New cranks keys, wavy washers & nylock nuts throughout.
Allow 1-2 weeks to build.
E-mail us for shipping cost to you.