Part name:
2275cc short block all new
Part number:
2275sb
Your cost:
$1,953.00
E-mail us your ship-to address to get a shipping quote.
Description:
This is an aluminum pentroof block that is cast solid behind #3, full flow ready, shuffle pinned on the center mains, has 8mm case savers and is clear coated for shine.
The heart of this was an 82 stroke forged counterweighted crank that we sent out for grind, polish, flywheel facing, 11/32" dowel drilling, drilled for PISTON SQUIRTERS (2 are visible on the crank flanges in the pic) and finally balancing. On the replacement build we'll use a new crank & the squirters will be an option at an extra cost.
A Scat Hardcore C-55 cam* rides in single thrust bearings and spins Empi billet straight cut steel gears.
Empi drilled lobe lifters will keep the lobes wet.
New pinion gear, pinion washers, dist tension spring, dist drive gear, gear clip & oil slinger.
Empi HD oil pump will push the oil thru a Doghouse enlarged galley (immediatley out of the pump).
*cam has 310 duration for a 4500 to 7000 rpm power band.
*cam lift with 1.1 rockers is 410 - with 1.25 rockers is 513 - with 1.4 rockers is 574.
DUAL SPRINGS RECOMMENDED FOR USE WITH THIS CAM.
New grooved plunger at the pulley end & stock plunger at the flywheel end. New stock springs at both.
New oil screen, chrome drain plate & magnetic drain plug.
Scat stock length 4340 I beam rods with 3/8" ARP bolts spin on 10 over rod bearings.
Scat chromoly lightened 8 doweled flywheel and Scat chromoly gland nut kit.
Allow 1-2 weeks to build.
E-mail for shipping cost to you.
The heart of this was an 82 stroke forged counterweighted crank that we sent out for grind, polish, flywheel facing, 11/32" dowel drilling, drilled for PISTON SQUIRTERS (2 are visible on the crank flanges in the pic) and finally balancing. On the replacement build we'll use a new crank & the squirters will be an option at an extra cost.
A Scat Hardcore C-55 cam* rides in single thrust bearings and spins Empi billet straight cut steel gears.
Empi drilled lobe lifters will keep the lobes wet.
New pinion gear, pinion washers, dist tension spring, dist drive gear, gear clip & oil slinger.
Empi HD oil pump will push the oil thru a Doghouse enlarged galley (immediatley out of the pump).
*cam has 310 duration for a 4500 to 7000 rpm power band.
*cam lift with 1.1 rockers is 410 - with 1.25 rockers is 513 - with 1.4 rockers is 574.
DUAL SPRINGS RECOMMENDED FOR USE WITH THIS CAM.
New grooved plunger at the pulley end & stock plunger at the flywheel end. New stock springs at both.
New oil screen, chrome drain plate & magnetic drain plug.
Scat stock length 4340 I beam rods with 3/8" ARP bolts spin on 10 over rod bearings.
Scat chromoly lightened 8 doweled flywheel and Scat chromoly gland nut kit.
Allow 1-2 weeks to build.
E-mail for shipping cost to you.