Part name:
2332cc short block - better than budget 2332
Part number:
2332sbbetter
Your cost:
$1,800.00
E-mail us your ship-to address to get a shipping quote.
Description:
This short block is based on a new raised roof style aluminum, shuffle pinned block. Cast solid behind #3 cyl and has 8mm case savers. Already full flow tapped & plugged.
It has single thrust cam bearings holding an Engle 125 cam* with CB Performance, USA made billet, straight cut, timing adjustable, gears.
Scat lightweight lifters. An Empi hi volume oil pump will push the fluids. An 84 stroke Forged Chromoly, Nitrided, Counterweighted crank with 8 long dowels spins stock length stroker H beam, pinned, & mate bal'd rods.
A Scat racer spacer sits between new crank gears. On the back is a new, stock 12V 200mm flywheel and a new Brazilian gland nut with a big Empi washer.
A new oil screen and chrome, drain plug style, drain plate with a magnetic drain plug.
A new hardware kit, new relief plungers & springs.
New silicone flywheel seal.
A perfect used distributor drive pinion gear & washers.
Nylock nuts on the mains & surrounds.
*Cam can also be any other reasonable cam of your choice.
Allow 1-2 weeks to build
E-mail for shipping cost to you.
It has single thrust cam bearings holding an Engle 125 cam* with CB Performance, USA made billet, straight cut, timing adjustable, gears.
Scat lightweight lifters. An Empi hi volume oil pump will push the fluids. An 84 stroke Forged Chromoly, Nitrided, Counterweighted crank with 8 long dowels spins stock length stroker H beam, pinned, & mate bal'd rods.
A Scat racer spacer sits between new crank gears. On the back is a new, stock 12V 200mm flywheel and a new Brazilian gland nut with a big Empi washer.
A new oil screen and chrome, drain plug style, drain plate with a magnetic drain plug.
A new hardware kit, new relief plungers & springs.
New silicone flywheel seal.
A perfect used distributor drive pinion gear & washers.
Nylock nuts on the mains & surrounds.
*Cam can also be any other reasonable cam of your choice.
Allow 1-2 weeks to build
E-mail for shipping cost to you.