Part name:
1776cc turnkey all new everything
Part number:
1776tk
Your cost:
$4,250.00
E-mail us your ship-to address to get a shipping quote.
Description:
Ok, here's what's in it: new oem block, double thrust cam bearings, 3 bolt fixed timing aluminum cam gear, Scat lifters, Engle 110 (430L x 284D) cam or Scat equivalent of your choice, cam plug, stock 69mm crank, balanced, crank timing gear, dist timing gear, std main & rod bearings, 2870A oil filter, oil pressure springs & plunger kit, oil pressure switch, bypass filtered oil pump, oil screen, deep sump, windage tray, resized-rebushed-end to end & mate bal'd rods, oil slinger, crank keys, cool tins, stock flywheel, balanced, all dowels, flywheel shims.
Dual port heads w/ single hi rev springs-chromoly retainers-hd keepers-40x35.5 valves-3/4" plug reach bore, copper head spacers, Mahle piston set w/ Total Seal Gapless 2nd rings & Grant others.
Chromoly steel pushrods, stock p-rod tubes, bolt together rocker shafts, new rocker spacers, swivel feet (HD nuts) on stock weight mated rockers, chromoly head studs, aluminum clip on valve covers, air hose couplers, plastic fresh air hoses w/ clamps.
51 amp Bosch alternator w/ stainless strap, chrome pulley-chrome nut & spacer-chrome alt stand, 11.3x912 belt, doghouse fan w/ hardware kit, black dual port cyl tin, black exhaust tin for oil cooler.
Exhaust clamps, 1 1/2" header w/ dual quiet pack mufflers, stock heater boxes w/ levers, black firewall tin, doghouse oil cooler-adapter-seals, chrome drain plate w/ magnetic plug, polished alum oil filler w/ push in cap & vent.
Scat crank pulley w/ 5 holes & black #'s w/ spacer, black doghouse shroud w/ heater ducts, throttle tube, black rear engine area tin, black pulley breast tin, black backing plate tin set.
Compu-Fire 35,000 V coil, 009 dist w/ Compu-Fire drop in ignition module, chrome dist clamp, long reach plugs, Spiro-Pro 8mm plug wires, big chrome air cleaner.
Single arm 34 pict 3 carb, fuel filter, fuel pump-rod-spacer, hi flow carb center section, silicone fly seal, chrome pulley bolt, German gland nut w/ Empi large washer, clutch plate bolts & washers, deluxe hardware set w/ nylocks for engine build, intake elbows-boots-clamps.
Sachs 200mm clutch plate & rigid clutch disc, screws washers nuts studs for assembly.
Allow 1-2 weeks to build.
E-mail for shipping cost to you.