| Part name: | 1641cc long block plus - rebuilt |
| Part number: | srb |
| Your cost: | $1,600.00 |
| Description: | Sold, but if you send us yours maybe we can duplicate this for you. Based on a dual relief AE block. Not painted. Block has 10mm head studs & case savers. Stock crank is 20 over on the rods. A stock cam turns stock gears. Unknown (presumed stock) lifters. A new appearance (I pulled it out & inspected it) Schadek (26mm gears) pump pushes the oil. New Mahle rod bearings. Rimco weight mated, end to end balanced and rebushed rods push new 87mm pistons in new cylinders with Total Seal gapless 2nd rings and Grant top & bottom rings. New stock dual port heads (short reach plug bores) with 50cc combustion chambers. Stock valve train consists of polished rocker shafts, cleaned rockers, swivel foot adjusters & HD adjust nuts. Stock pushrods (checked for straightness & polished) ride in stainless steel windage p-rod tubes. Stock steel valve covers finish off the sides. A stock 12 volt 200mm flywheel with a German gland nut & washer holds down the back. New oil drain screen. A stock used oil drain plate with magnetic drain plug finishes the bottom off. Compression ratio set to 7.8:1. |